Genteq® EVERGREEN® 6303S Condenser Fan Motor, 1/3 hp Motor, 208 to 230 V, 1 ph, 825/1075 rpm Motor, TEAO Enclosure

Genteq® EVERGREEN® 6303S Condenser Fan Motor, 1/3 hp Motor, 208 to 230 V, 1 ph, 825/1075 rpm Motor, TEAO Enclosure

Manufacturer: Regal Rexnord Corporation
Brand: Genteq®
Part #: 438475
MPN: 6303S
CPN:
Amperage Rating      :      2.8 A
Bearing Type      :      Ball
Depth      :      10.98 in
Enclosure Type      :      TEAO
Frequency Rating      :      60 Hz
Function Type      :      Motor
Motor HP      :      1/3 hp
Motor RPM      :      825/1075 rpm
Mounting Type      :      Stud
NEMA Frame Size      :      48
Number of Speeds      :      2
Packaged Depth      :      15.7 in
Packaged Height      :      7.1 in
Packaged Width      :      6.7 in
Phase      :      1 ph
Product Family      :      EVERGREEN®
Rotation Direction      :      CW/CCW
Service Factor      :      1
Shaft Diameter      :      1/2 in
Shaft Length      :      6-1/2 in
Shipping Weight      :      13 lb
Voltage Rating      :      208 to 230 V

Genteq® Condenser Fan Motor, 1/3 hp Motor, 208 to 230 V, 1 ph, 825/1075 rpm Motor, TEAO Enclosure, 48 NEMA, 2 -Speed, 1/2 in Dia Shaft, 6-1/2 in L Shaft, Service Factor 1, 10.98 in D, CW/CCW, 2.8 A, EVERGREEN®, 13 lb, 7.1 in, 6.7 in, 15.7 in, Motor, Ball Bearing, 60 Hz, Stud Mounting

  • Evergreen OM - Retrofit Condenser Fan Motor (Replaces PSC and Shaded Pole Motors)
  • Electronically Commutated (ECM), Electronically Protected
  • 1/3 HP (Replaces 1/3-1/12). Two Operating Speeds (Constant Speed), 1075 RPM replaces motors rated 1000-1100 RPM, 825 RPM replaces motors rated 800-850 RPM
  • 208-230 Voltage (Allowable Voltage Range 196-264), Single-Phase Input, 50-60 Hz, Totally Enclosed Air Over
  • Class B Insulation, -20 to 60 deg C Ambient
  • Rotation Reversible (Factory Set To CCW Lead End)
  • Permanently Lubricated Ball Bearing
  • Leads 54" Length With 1/4" Fast On Terminals, Ground Wire #10 Eyelet
  • Mounting Horizontal or Vertical Shaft-down, Belly Band (Not Supplied With Motor), Extended Clamp Bolts, or OEM Mounting Holes

back To Top