| Length | : | 10 ft |
| Load Capacity | : | 25 to 150 lb |
| Package Quantity | : | 10 Pack |
| Product Family | : | Dyna-Stud® |
| Product Type | : | Threaded Stud and Cable Assembly |
| Thread Size | : | 3/8 in |
There are many ways to suspend duct work from a concrete or steel structure. One of the most common methods is to screw threaded rod into internally threaded expansion anchors. Sizing the threaded rod and using washers and nuts to complete support structures is time consuming. Dyna-Studs used with Dyna-Tite cable locks can greatly decrease labor time for constructing suspension systems. The Dyna-Stud is a heavy duty threaded stud with one end of an aircraft rated cable attached. The stud is threaded into the expansion anchor without putting stress on the cable. This makes for a much safer and tighter connection. The raw end of the cable, in conjunction with the cable lock, is used to attach the object being supported.
Duro Dyne® Threaded Stud and Cable Assembly, 10 ft Length, 3/8 in Thread, 25 to 150 lb Load, Dyna-Stud®